Aux Mixing[Aux-Mix] - Sanwa MT-44 Manual

Usage of each feature
●AUX is a feature to set the performance of AUX1 and AUX2 (3ch, 4ch). You can choose from STEP AUX (STEP),
POINT AUX (POINT), 4WS (4-Wheel Steering: Coordinate Phase, Opposite Phase), MOA (Motor On Axle),
AUX-MIX (AUX Mixing: ST-AUX/TH-AUX) and CODE5/CODE10 (Code Communication).
*Setting of AUX TYPE is done in the System Menu. Make a setting according to the purpose of the use.

AUX MIXING[AUX-MIX]

●Setting AUX Mixing allows you to mix from the steering to AUX and from the throttle to AUX.
*Set AUX TYPE and MODE for operation to use for [AUX TYPE] of [ SYSTEM].
●At factory, the AUX feature is set to Step AUX.
1) Select [AUX] with the multi-selector and define with the Enter
operation.
2) Setting Mixing Rate
Set the Mixing Rate with the multi-selector.
○Setting range: 0～100%
○Default: 100%
* Set to [AUX MIX] with [AUX TYPE] of [SYSTEM] and set the
Mixing performance with [MODE] according to the usage.
* Assign the features of the Mixing Rate to Trim or the switch
with Key Assignments, or operate with the multi-selector.
３５
AUX
Setting Mixing Rate
AUX
ENTER BACK
Servo Monitor