Table of Contents
Advertisement
KEY ASSIGN TRIM
●You can change the setting value of each feature with Trim1 - Trim4.
●You can also change the setting of the variation change in one time of Trim operation
with the STEP setting and the direction of the action with the REV setting.
1)Select [SYSTEM] with the multi-selector and determine
with the Enter operation.
2)Select [KEY ASSIGN] with the multi-selector, switch to
[TRIM] with the Select button, select an item to set and
determine with the Enter operation.
3)Setting Trim (TRM1/TRM2/TRM3/TRM4)
Select [TRIM] to change the setting and set a feature to
assign with the multi-selector.
○Setting range:
An assignable feature
TRIM
OFF、TRIM-ST、TRM-TH、TRIM-A1、TRIM-A2、D/R-ST、
TRIM1
D/R-TH、D/R-BR、CU-R-ST、CU-R-TH、CU-R-BR、
TRIM2
SP-ST-F、SP-ST-R、SP-TH-F、SP-TH-R、ALB-PO、
TRIM3
ALB-ST、ALB-LG、ALB-CY、OFFSET、AUX1、
TRIM4
AUX1(CODE1～10)、AUX2、AUX2(CODE1～10)
○Default TR1：TRM-ST
TR2：TRM-TH
TR3：D/R-ST
TR4：D/R-BR
4)Setting Step (STEP)
Set the variation of the movement by one-time Trim operation.
Select [STEP] with the multi-selector, determine with the
Enter operation and set the variation.
○Setting Range: 1～100
○Default:
5)Setting the Direction of Action
Set the direction of action when operating Trim.
Select [REV] with the multi-selector, determine with the
Enter operation and set the direction of action.
○Setting Rage: NOR/REV
NOR
○Default:
○Default: TRIM-1：Steering Trim(TRM-ST)
TRIM-2：Throttle Trim(TRM-TH)
TRIM-3：Steeering Dual Rate(D/R-ST)
TRIM-4：Brake Dual Rate(D/R-BR)
5
５２
Advertisement
Table of Contents
