Programming The Initial Setup Menu - HySecurity SlideSmart DC 15 Installation And Reference Manual

Programming the Initial Setup Menu

Several sequential displays present information which must be configured before SlideSmart will function.
Once the configuration is complete, the information is retained even when a power loss occurs.
To edit the Menu
Press SELECT.
Two top characters blink.
UC 0
USAGE CLASS
OPEN CLOSE STOP
SELECT
PREV NEXT
SH 0
GATE HANDING
OPEN CLOSE STOP
PREV NEXT SELECT
WT 0
GATE WEIGHT (LB)
OPEN CLOSE STOP
NEXT SELECT
PREV
Figure 1-15.
Revision D
Table 1-2. Menu Mode Navigational Buttons
To navigate through
the SELECTIONS
Press NEXT.
Continue pressing NEXT
to view all selections.
SELECTIONS
MENU RESET
SELECTIONS
MENU RESET SELECTIONS
MENU RESET
Once the gate weight is set, the operator is ready to learn
OPEN and CLOSE limits.
Installation
Gate Bracket and Chain Installation
To choose what is on
the display
Press SELECT.
blinking characters
become static.
0 - No Usage Class set.
1 - Single Family residential up to four units.
2 - Multi-family, hotel, etc.
3 - Industrial use, not for general public.
4 - Guarded and monitored facility, not for general public.
0 - No handing set. Gate will not move until handing is set.
Looking at the gate from the secure side, choose:
L - If the gate slides open to the left.
R - If the gate slides open to the right.
0 - Gate weight not set.
SlideSmart DC 15
1 - Gate weight: 0 to 400lbs (0 to 181Kg)
2 - Gate weight: 401 to 800lbs (182 to 363Kg)
3 - Gate weight: 801 to 1100lbs (363 to 499Kg)
4 - Gate weight: 1101 to 1500lbs (499 to 680Kg)
SlideSmart DC 10F
1 - Gate weight: 0 to 250lbs (0 to 114Kg)
2 - Gate weight: 251 to 500lbs (114 to 227Kg)
3 - Gate weight: 501 to 750lbs (227 to 340Kg)
4 - Gate weight: 751 to 1000lbs (341 to 454Kg)
To navigate between
menus
Press NEXT or PREV.
Advance - press NEXT.
Previous - press PREV.
1-11