STMicroelectronics STM32L162RC Manual page 120

Revision History
Date
06-Nov-2013
19-May-2014
120/123
Table 72. Document revision history (continued)
Revision
Updated Table 67: LQFP64, 10 x 10 mm 64-pin low-profile quad flat
package mechanical data
mm pitch package mechanical data
inside columns.
Updated Chapter 8: Part numbering
Added V
DD
5 Functionalities depending on the working mode (from Run/active down
to standby)
(continued)
Updated "SDA data hold time" and "SDA and SCL rise time" values
and added "Pulse width of spikes that are suppressed by the analog
filter" row in
Updated the conditions in
Removed ambiguity of "ambient temperature" in the electrical
characteristics description.
Added package UFBGA100.
Resistive load and capacitive load now abbreviated "RL" and "CL"
respectively (instead of "RLOAD" and "CLOAD") throughout the
document.
Modified introduction of
continuum.
Updated Table 3: Functionalities depending on the operating power
supply range.
Updated Table 5: Functionalities depending on the working mode (from
Run/active down to
Added row V
characteristics.
Modified I
IO
Added input voltage in
6
Moved Table 17: Embedded internal reference voltage
Section 3.10.2: Internal voltage reference (VREFINT)
Embedded internal reference
Modified introduction of
Updated all tables in
(i.e. Table 18
Modified "Wakeup time from low-power mode" to
Updated Table 27: High-speed external user clock
Updated Table 28: Low-speed external user clock
Modified t
LOCK
Modified Functional susceptibility to I/O current
Updated Table 43: I/O static
Updated Table 44: Output voltage
Updated Table 46: NRST pin
DocID022881 Rev 10
Changes
and Table 68: UFBGA100, 7 x 7 mm, 0.5
= 1.71 to 1.8 V operating power supply range in
2
Table 56: I C characteristics
Table 26: Low-power mode wakeup
Section 2.2: Ultra-low-power device
standby).
–V and updated I
REF+ DDA
maximum values in Table 12: Current
Table 14: General operating
voltage.
Section 6.3.4: Supply current
Section 6.3.4: Supply current characteristics
to Table 24)
values in Table 34: PLL
characteristics.
characteristics.
characteristics.
STM32L162VC, STM32L162RC
exchange Min and Typ values
(title).
in Table 11: Voltage
IO
characteristics.
conditions.
from
to Section 6.3.3:
characteristics.
Section 6.3.5.
characteristics.
characteristics.
characteristics.
injection.
Table 5:
timings.