STM32L162VC, STM32L162RC
Date
06-Nov-2013
Table 72. Document revision history (continued)
Revision
Added the UGBGA100 package.
Updated I
DD
maximum current consumptions in Standby
Updated
Figure 6: Pin loading
Updated
Figure 7: Pin input
Updated
Figure 14: Typical application with a 32.768 kHz
Updated
Figure 24: Recommended NRST pin
Updated
Figure 25: I2C bus AC waveforms and measurement
Updated
Table 70: Temperature sensor calibration values
inside
Section 6.3.23: Temperature sensor
Updated
Table 16: Embedded internal reference voltage calibration
values
and moved inside
voltage.
Updated
Chapter 3.15: Touch
Updated
Figure 9: Power supply
Updated
Table 11: Voltage characteristics
Updated
Table 12: Current characteristics
STM32L15xxBxxA datasheet.
Updated
Table 14: General operating
row.
5
Updated
Section 6.3.4: Supply current
Updated
Table 18: Current consumption in Run mode, code with data
processing running from
Updated
Table 21: Current consumption in Run mode, code with data
processing running from
Created
Section 6.3.5: Wakeup time from low-power
Updated
Chapter 6.3.6: External clock source
Updated
Table 27: High-speed external user clock
Moved
Figure 12: High-speed external clock source AC timing diagram
after
Table 27: High-speed external user clock
Updated
Table 29: HSE oscillator
Updated
Chapter 6.3.12: Electrical sensitivity characteristics
Updated
Chapter 6.3.13: I/O current injection
Updated
Table 50: I/O current injection susceptibility
footnote.
Updated
Chapter 6.3.15: NRST pin
Replaced
Table 54: NRST pin characteristics
STM32L15xxBxxA datasheet.
Updated
Table 65: ADC
Updated direct channels VDDA range in
16
MHz.
DocID022881 Rev 10
Changes
(WU from Standby) unit in
conditions.
voltage.
Section 6.3.3: Embedded internal reference
sensing.
scheme.
Flash.
RAM.
characteristics.
characteristics.
characteristics.
Table 23: Typical and
mode.
crystal.
protection.
and moved
characteristics.
added row.
replaced with the one inside
conditions, footnote and added
characteristics.
mode.
characteristics.
characteristics.
characteristics.
(title).
characteristics.
and added
with the one from
Table 67: R
max for f
AIN
circuit.
=
ADC
119/123
122
Need help?
Do you have a question about the STM32L162RC and is the answer not in the manual?