List Of Components; Power And Lamp Requirements; Software Requirements - Christie CP2000-XB Setup Manual

Section 1: Introduction
1.2

List of Components

Ensure the following components were received with the projector:
 Projection Head includes:
• Line cord
• Touch Panel Controller with mounting hardware and 3 ft. cable
• Standard and high-security keys for lamp and igniter service access, plus assorted Allen keys
• CP2000-XB User Manual
 Lamp Ballast (three-phase 7 kW for all lamps in all countries)
 Choice of lamp kit (incl. protective gear)
 Cable kit (incl. two lamp power cables and two communication/control cables)
 Extractor Kit, 50/60 Hz
 Choice of high-contrast or high brightness lenses (does not include auxiliary lens or mount—both
optional)

Optional FredFrame (includes fork lift rails for bottom).

Optional Rack Stand

1.2.1 Power and Lamp Requirements

POWER LEVELS: The universal ballast in the CP2000-XB offers adjustable lamp power to suit the size of
lamp currently in use. Software allows each lamp to be over-driven by approximately 10% of its maximum
rating.
LAMPS: The CP2000-XB accommodates different lamps. Refer to Section 8: Specifications of the CP2000-
XB User Manual (020-100163-xx) for a complete list of supported
OTHER: Optional Christie components include an auxiliary lens mount and lens, DCP Librarian setup
software, and a 50-ft. TPC cable. Refer to the complete option list in Section 8: Specifications of the CP2000-
XB User Manual (020-100163-xx).

1.2.2 Software Requirements

DLP version 14 series or higher
TPC version 2.9 or higher
1-2
lamps.
CP2000-XB Setup Guide
020-100250-02 Rev. 1 (06-2009)