Cessna 182S Pilot Operating Handbook page 381

CESSNA
MODEL 182S
AUTOPILOT ENGAGEMENT:
SECTION 9 - SUPPLEMENTS
SUPPLEMENT 7 • FAA APPROVED
1. AP Button •. PRESS. Note ROL annunciator on.
If
no other
modes are selected the autopilot will operate in the ROL
mode.
NOTE
Aircraft heading may change in ROL mode due to
turbulence.
HEADING HOLD
1. Heading Selector Knob -- SET bug to desired heading.
2. HOG Mode Selector Button _. PRESS. Note HOG mode
annunciator ON. Autopilot will automatically turn the aircraft to
the selected heading.
COMMAND TURNS (HEADING HOLD MODE ENGAGED)
1. Heading Selector Knob -. MOVE bug to the desired heading.
Autopilot will automatically turn the aircraft to the new selected
heading.
NAV COUPLING
1. #1 OBS Knob .. SELECT desired cou rse.
2. NAV Mode Selector Button .• PRESS. Note NAVARM
annunciated .
3. Heading Selector Knob .. ROTATE bug to agree with OBS
course.
NOTE
When NAV is selected, the autopilot will flash HOG for 5
seconds to remind the pilot to reset the HOG bug to the
aBS course. A 45 ° intercept ang le will then be
automatically established based on the position of the
bug.until intercept.