Cessna 182S Pilot Operating Handbook page 253

SECTION 9 - SUPPLEMENTS
SUPPLEMENT 1 - FAA APPROVED
SECTION
2
LIMITATIONS
CESSNA
MODEL 182S
There is no change to the airplane limitations when this avionic
equipment is installed.
SECTION
3
EMERGENCY PROCEDURES
There is no change to the airplane emergency procedures when
this avionic equipment is installed. However, if the frequency
readouts fail, the radio will remain operational on the last frequency
selected. If either frequency transfer button is pressed and held
while power is applied to the unit, the unit wakes up with 120.00
MHz in the COMM use frequency and 110.00 MHz in the NAV
active frequency, with both COMM and NAV in the active entry
mode. This will aid the pilot in blind tuning the radio.
SECTION
4
NORMAL PROCEDURES
COMMUNICATION RECEIVER-TRANSMITTER OPERATION:
1. OFF/PULLfTEST Volume Control -- Turn clockwise; pullout
and adjust to desired audio level; push control back in to
activate the automatic squelch.
2. MIC Selector Switch (on audio control panel) -- SET to COMM
1.
3. SPEAKER Selector (on audio control panel) -- SET to desired
mode.
4. COMM Frequency Selector Knobs -- Select desired operating
frequency.
5. COMM Transfer Button -- PRESS to transfer desired
frequency from the STBY display into the COMM display.
S1-1 ?