Table of Contents
Advertisement
3.10 Saving to USB Flash Memory (/USB1 Option)
Procedure
3-18
• Connecting USB Flash Memory
1.
Connect a USB flash memory device to the DX USB port.
After the message, "USB device has been connected." appears, you can use the USB flash
memory device.
2.
In operation mode, the DX displays selectable memory operations. Use the arrow
keys to select an operation, and then press DISP/ENTER.
Batch Overview Mode
When set to auto save
Batch Single Mode
When set to auto save
Option
All save
Save manual
Data save mode
Load settings
Cancel
• Removing the USB Flash Memory Device
For the operating procedure to remove the USB flash memory device, see section 2.12
in the User's Manual.
When set to manual save
When set to manual save
Description
Saves all the saved data in internal memory to the USB flash
memory device.
Saves unsaved data in internal memory to the USB flash memory
device.
Switches to the DATA SAVE MODE display. For instructions on how
to save data in internal memory to an external storage medium, see
section 4.8 in the User's Manual.
This option is only displayed when it is available.
* When the DX is configured to display DATA SAVE MODE on the
display selection menu. You can change the options shown on the
display selection menu by using the menu customize function.
Switches to the setup load display in setting mode. For instructions
on how to load setup data, see section 6.9 in the User's Manual.
Closes the operation selection window.
*
IM 04L41B01-03E
Advertisement
Table of Contents
