Chapter 1 Connecting To A Pc; Connecting Via Usb - YOKOGAWA SL1000 User Manual

Chapter 1 Connecting to a PC

1.1 Connecting via USB

Procedure
IM 720320-17E
Use the following procedure to connect the SL1000 High-Speed Data Acquisition Unit
(hereinafter, the SL1000 unit) to the PC.
Installing the Acquisition Software
Install the acquisition software that came with the SL1000 unit on the PC. For
instructions, see section 2.2, "Installing or Uninstalling the Acquisition Software" in the
SL1000 Acquisition Software User's Manual (IM720120-61E).
Connecting via USB Cable
Connect the SL1000 unit to the PC by following the procedure in section 4.1, "Connecting
to a PC" in the SL1000 High-Speed Data Acquisition Unit User's Manual (IM720120-01E).
Installing the USB Driver
Install the USB driver on the PC by following the procedure in section 2.3, "Installing the
USB Driver" in the SL1000 Acquisition Software Unit User's Manual (IM720120-61E).
This is only necessary the first time the SL1000 unit is connected to the PC.
Note
The USB and Ethernet interfaces cannot be used at the same.
1
2
3
4
App
Index
1-1