Configuring The Instrument Ethernet Settings - YOKOGAWA DL350 User Manual

1.4

Configuring the Instrument Ethernet Settings

This section explains the settings listed below. You must configure these settings when controlling
the instrument remotely through an Ethernet interface.
• Network connection timeout period
Utility Network Menu
1.
On the waveform screen, tap MENU > Utility > Network > VXI11.
2.
Tap Time Out. Use the displayed input box to set the timeout period.
Configuring TCP/IP Settings
To use the Ethernet interface features, you must specify the following TCP/IP settings.
• IP address
• Subnet mask
• Default gateway
For details on how to specify these settings, see section 19.2, "Configuring TCP/IP Settings" in the
DL350 User's Manual, IM DL350-02EN.
IM DL350-17EN
Timeout period
(Tap + or – to adjust.)
1
2
3
4
5
App
Index
1-5