Dx2000T Settings - YOKOGAWA DX2004T User Manual

DX2000T Settings

IM 04L45B02-02EN
For an explanation of the settings, see the DXA120 DAQSTANDARD Hardware Setup
User's Manual, IM 04L41B01-64EN.
In the above manual, read "DX2000" as "DX2000T." Only the settings that are different
from the DX2000 are listed below.
System Configuration Dialog Box
On the DXAdvanced tab, set the model to DX2000T.
Basic setting mode > Environment tab > Detail Setting
• Touch panel
OFF The touch panel is not locked.
ON The touch panel is locked.
Password The touch panel is locked, and a password is required to unlock it.
• Password
This is the password that is used to unlock the touch panel. The password is displayed
as "********." (The password is up to eight characters.)
When Touch panel is set to Password, this setting is enabled.
General setting > Menu Customize > Function menu
TouchPnl Lock is one of the available selections.
Using DAQSTANDARD
61