Input And Output Specifications - Panasonic FP0R User Manual

3.3 Input and Output Specifications

(1)Input specifications
Insulation method
Rated input voltage
Rated input current
Input impedance
Operating voltage range
Input point per common
(Either the positive or negative
of the input power supply can
be connected to common
terminal.)
Min. on voltage/Min. on current
Max. off voltage/Max. off current
Response time
Operating mode indicator
Note) The above table shows the specifications of FP0R Expansion Unit. For FP0 Expansion Unit, the
rated input voltage is approx. 4.3 mA, and the input impedance is approx. 5.6 kΩ
Limitations on number of simultaneous input on points
Keep the number of input points per common which are simultaneously on within the following range as determined
by the ambient temperature.
Internal circuit diagram
3-4
Item
E8X/E16P/E16T
E32T/E16X
E8R
OFF → ON
ON → OFF
Specifications
Optical coupler
24 V DC
Approx. 4.7 mA (at 24 V DC)
Approx. 5.1 kΩ
21.6 V DC to 26.4 V DC
8 points/common
16 points/common
4 points/common
19.2 V DC/3 mA
2.4 V DC/1 mA
2 ms or less
2 ms or less
LED display
R1=5.1 kΩ, R2=910Ω
.