How To Prohibit Access With Password - Panasonic FP0R User Manual

Hide thumbs Also See for FP0R:

Table of Contents

How to prohibit access with password

1. Select "Tool" > "Set PLC Password" in the menu bar.

The "Set PLC Password" dialog box is displayed.

2. Set the items in the table below, and click on the "Settings" button.

Digit number

Operation Mode

4 digits or 8 digits

3. Input the password for confirmation again, and click the [OK] button.

Once the PLC is in write-read inhibit state (password-protected), the following message is displayed.

4. Click the "OK" button.

Select "4 digits" or "8 digits".

Select "Protect".

Input a password to be set.