Restrictions On Unit Combination; Controllable I/O Points - Panasonic FP0R User Manual

1.2 Restrictions on Unit Combination

Up to three expansion units can be added on the right of the FP0R, these expansion units being either
expansion units or intelligent units.
A combination of relay output and transistor output types is also possible.

Controllable I/O points

Type of No. of I/O points when
control unit
C10
C14
C16
C32
T32
F32
Note:
Install the FP0 thermocouple unit on the right side of all other expansion units.
-
If it is installed on the left side, the total precision will deteriorate.
-
Install the FP0 CC-Link slave unit on the right side of all other expansion units. There is no expansion
-
connector on the right side.
Install the FP0 RTD unit on the right side of all other expansion units.
-
using control unit
10 points
14 points
16 points
32 points
When the expansion unit
is the same output type
Max. 58 points
Max. 62 points
Max. 112 points
Max. 128 points
When the expansion unit
is a transistor output type
Max. 106 points
Max. 110 points
Max. 112 points
Max. 128 points
1-7