Panasonic FP0R User Manual page 248

13.1.3 Communication Specifications
Tool port
Interface
Transmission distance
Baud rate
Communication method
Synchronous method
Transmission format
Order of data transmission
Communication function
USB port
Standard (Baud rate)
Communication mode
COM port (RS232C port)
Interface
Transmission distance
Baud rate
Communication method
Synchronous method
Communication format
Order of data transmission
Communication function
Factory default
Tool port
COM port (RS232C port)
13-6
RS232C
15 m
2400,4800,9600,19200,38400,57600,115200 bit/s
Half-duplex operation
Asynchronous communication method
Data length 7 bits / 8 bits
Parity: None/Even/Odd
Start code: STX / No STX
End code: CR / CR+LF / None / ETX
Stop bit: 1 bit / 2 bits
Transmits from bit 0 character by character.
Computer link (Slave)
Modem initialization
General-purpose communication (In the RUN mode only)
USB2.0 Fullspeed
Computer link (Slave)
RS232C
15 m
2400,4800,9600,19200,38400,57600,115200 bit/s
Half-duplex communication
Start stop synchronous system
Data length: 7 bits/8bits
Parity: None/Even/Odd
Start code: STX/No STX
End code: CR/CR+LF/None/ETX
Stop bit: 1 bit/2 bits
Transmits from bit 0 character by character.
Computer link (Master/Slave)
Modem initialization
General-purpose communication
MODBUS RTU (Master/Slave)
PC(PLC) link (A maximum of 16 units can be connected by converting
to RS485.)
Baud rate Data length
9600 bit/s 8 bits
9600 bit/s 8 bits
Description
Description
Description
Parity
Odd
Odd
Stop bit
1 bit
1 bit