Communicaton Port Type; Tool Port; Usb Port; Com Port - Panasonic FP0R User Manual

7.2 Communicaton Port Type

7.2.1 Tool Port

This connector is used to connect a programming tool.
A commercial mini-DIN 5-pin connector is used for the tool port on the control unit.

7.2.2 USB Port

This connector is used to connect a programming tool.

7.2.3 COM Port

It is a screw down connection type terminal block (3-pin).
7-4
Pin No. Signal name
1 Signal Ground
2 Send Data
Receive Data
３
(Not used)
４
+5 V
５
A commercial USB2.0 cable (A: miniB) can be used.
Standard
connector shape
Note) The USB driver should be installed. It is assigned to a
virtual COM port on the PC Select "RS232C(C-NET)" in a
programming tool.
Abbreviation Signal direction
SG -
SD Unit → External device
RD Unit ← External device
- -
+5 V Unit → External device
USB2.0
USB miniB type