How To Permit Access With Password - Panasonic FP0R User Manual

Hide thumbs Also See for FP0R:

Table of Contents

How to permit access with password

1. Select "Tool" > "Set PLC Password" in the menu bar.

The "Set PLC Password" dialog box is displayed.

Set the items in the table below, and click on the "Settings" button.

Digit number

Operation Mode

4 digits or 8 digits

Once access is permitted, the following message is displayed.

3. Click the "OK" button.

If the power supply of the PLC is turned on/off when the access is permitted, the PLC will be password

protected again.

Select "4 digits" or "8 digits".

Select "Access".

Input the set password.