Power Supply Unit And I/O Link Unit Specifications - Panasonic FP0R User Manual

13.4 Power Supply Unit and I/O Link Unit Specifications

13.4.1 Power Supply Unit Specifications (AFP0634)
Input Rated operating voltage
Operating voltage range
Rated frequency
Operating frequency
The number of phase
Inrush current
Leakage current
Holding time
Output Rated voltage
Voltage accuracy
Rated current
Operating output current
Output ripple
Over current regulation
Over voltage regulation
Life time
13.4.2 I/O Link Unit Specifications (AFP0732)
Item
Communication method
Synchronous method
Transmission line
Transmission distance (Total length)
Baud rate
No. of I/O points per one I/O link unit
Remote I/O map allocation
Interface
Transmission error check
Note) Those numbers of points are the numbers that can be used for I/O link via a host computer and
the network MEWNET-F. When setting the output of the I/O link error flag to ON (available), it is 63
points (31 input points & 32 input points).
Item
Two-wire half-duplex communication
Start stop synchronous system
Duplex cable (twisted-pair cable or
VCTF 0.75 mm2 x 2C <JIS> or equivalent)
Max. 700 m (when using twisted-pair cable)
Max. 400 m (when using VCTF cable)
0.5Mbps
64 points (Input: 32 points + Output: 32 points)
32X/32Y
RS485-compliant
CRC method
Description
100-240 V AC
85-264 V AC
50/60 Hz
47 to 63 Hz
Single phase
30 A(0-p) or less (Cold start)
0.75 mA or less
10 ms or more
24 V DC
±5%
0.7 A
0 to 0.7 A
500 mV or less
0.735 A or more
Possible
20000h ( at 55 °C)
Description
Note)
13-11