Power Supply Unit Specifications; General Specifications - Panasonic FP7 Series User Manual

8.2 Power Supply Unit Specifications

8.2.1 General Specifications

Items
Operating ambient
temperature
Operating ambient
humidity
Storage ambient
temperature
Storage ambient humidity
Breakdown voltage
Insulation resistance
(test voltage: 500V DC)
Vibration resistance
Shock resistance
Noise resistance
Environment
EU Directive applicable
standard
Overvoltage category
Pollution degree
Weight (main unit)
(Note) Cutoff current: 10 mA (Factory default setting)
0 to +55°C
10 to 95%RH (at 25°C, no-condensing)
-40 to +70°C
10 to 95%RH (at 25°C, no-condensing)
All the AC inputs ←→ All the DC outputs
All the AC inputs ←→ Protective earth terminals
All the AC inputs ←→ All the alarms
All the AC inputs ←→ All the DC outputs
All the AC inputs ←→ Protective earth terminals
All the AC inputs ←→ All the alarms
Based on JIS B 3502 and IEC 61131-2:
5 to 8.4 Hz, half amplitude 3.5 mm
8.4 to 150 Hz, constant acceleration 9.8 m/s
X, Y and Z axes, 10 sweeps (1 octave/mm)
Based on JIS B 3502 and IEC 61131-2
147 m/s 2 , X, Y and Z axes, times
1500 V[p-p] with pulse widths of 50 ns or 1 μs (based on in-house measurements)
Free from corrosive gases and excessive dust.
EMC Directive: EN 61131-2, Low-Voltage Directive: EN 61131-2
Category II or lower
Pollution degree 2
AFP7PSA1: approx. 240g
AFP7PSA2: approx. 290g
8.2 Power Supply Unit Specifications
Description
2300 V AC, 1 minute (Note)
1500 V AC, 1 minute (Note)
2300 V AC, 1 minute (Note)
100 MΩ or larger
2
8-27