Extended Grooving - Siemens SINUMERIK 808D Programming And Operating Manual

3.4.5.3

Extended grooving

Operating sequences
You can access the grooving cycle overview by pressing the softkey "Groove" in the basic
screen for "Manual Machine Plus".
Figure 3-28
You can access the "Extended grooving" function by pressing the softkey "Expan. groove" in
the grooving cycle overview.
Alternatively, you can select "Exp. groov. cyc" with <Cursor keys> and activate with the input
key.
Figure 3-29
Manual Machine Plus (Turning)
Programming and Operating Manual, 12/2012, 6FC5398-3DP10-0BA0
Grooving cycle overview - "Exp. groove. cyc" selected
Extended outer groove
3.4 Manual machining using cycles (functions)
Manual machining
53