Tool Change In The Machining Step Program - Siemens SINUMERIK 808D Programming And Operating Manual

4.1

Tool change in the machining step program

Functionality
You add a tool change step to the machining step program.
If the value of the display machine data 361 (USER_MEAS_TOOL_CHANGE) is 1, the tool
number can be specified manually. Otherwise the controller saves the active tool as
machining step in the step program.
Operating sequences
You have opened a machining step program.
1. Move the cursor to the machining step after which the tool should be changed.
2. Press the "Tools" softkey.
Manual Machine Plus (Turning)
Programming and Operating Manual, 12/2012, 6FC5398-3DP10-0BA0
Figure 4-5 Machining step programmed opened
A list with all tools created in the NC will be displayed.
Figure 4-6 Tool selection for tool change
Machining the machining step program manually
4.1 Tool change in the machining step program
91