Siemens SINUMERIK 808D Programming And Operating Manual page 84

Manual machining
3.4 Manual machining using cycles (functions)
Softkeys
The "Cycle overview" function lists all free contours contained in the machining step
program.
Figure 3-60
To select, place the cursor on the appropriate line and press the "OK" softkey.
It is also possible to assign a contour of an external contour subroutine to the cycle.
Figure 3-61
The "External contours" function opens a dialog box with which the contour subroutine can
be selected. The "OK" softkey function links the selected program with the cycle.
The function branches to the contour input.
84
Free contour - overview
Add external contours
Programming and Operating Manual, 12/2012, 6FC5398-3DP10-0BA0
Manual Machine Plus (Turning)