Siemens SINUMERIK 808D Programming And Operating Manual page 27

Operating sequences
Follow the sequence of operations below to enter the required tool number:
1. Move the cursor onto the input field for the T value.
2. Enter the tool number using the numeric keys
3. Accept the tool number by pressing the <INPUT> key.
4. Press the <CYCLE START> key.
The tool change is changed.
Please note the following for a manual tool change:
● The real tool change on the machine (tool relocation) is finished.
● The appropriate tool number (tool offset) must be communicated to the control by making
Manual Machine Plus (Turning)
Programming and Operating Manual, 12/2012, 6FC5398-3DP10-0BA0
(The tool you wish to select must be set up in the tool list!)
The following information text with the corresponding tool number is displayed:
Figure 3-6 Tool change with CYCLE START
Acknowledge this information text using the "OK" softkey.
a manual entry.
CAUTION
A new tool number may be selected only if all axes and the spindle are stationary.
DANGER
Notice: The tool number entered in the T value field must correspond to the tool loaded
into the machine! Otherwise, the tool will have to be recalibrated (see also section
"Measuring tools (Page 9)"). An uncalibrated or incorrectly calibrated tool can lead to
dimensional errors or to incorrect cutting values.
3.2 Display and operator control options in the main screen
Manual machining
27