Description of the Safety Integrated Extended
Functions
Overview
This chapter should provide first-time users with a quick overview of the principle mode of
operation of safety functions.
The entry into the description of the safety functions is based on the definition according to
standard EN 61800-5-2 and some simple examples for using the function.
The description of the functions is simplified, as far as possible, to clearly show essential
properties and setting options.
References
More information about commissioning the functions can be found in:
SINAMICS S120 Safety Integrated Function Manual, Chapter: "Commissioning the
functions"
Prerequisite
A license is required to use the Safety Integrated Extended Functions.
Enter the associated license key via the operating software SINUMERIK Operate.
References
SINUMERIK 828D Turning and Milling Commissioning Manual, Chapter "Checking and
entering licenses"
Safety Integrated
Function Manual, 07/2012, 6FC5397-3EP40-3BA0
Software option
You require the following software option in order to use this function:
"drive based SI-axis/spindle additional 1 axis/spindle"
(MLFB: 6FC5800-0AC50-0YB0).
3
17