Manual machining
3.3 Manual machining with machining types
3. By pressing the <Cursor keys> you can go to the display field which contains the active
4. By pressing the toggle key <SELECT>, you can select the radius type.
Notice: Omitting or using the wrong sign for the input values or entering the wrong arc
direction can lead to a collision and may destroy the tool or the workpiece.
Note
Any limit stops that are activated should be disabled before starting radius turning or set to a
value outside the traversing range needed for radius turning. Otherwise an error message is
transmitted by the controller which prevents the "Manual radius turning" function being
started.
36
radius type (with an orange background).
Figure 3-14
Radius turning type A
DANGER
Programming and Operating Manual, 12/2012, 6FC5398-3DP10-0BA0
Manual Machine Plus (Turning)