Manual machining
3.3 Manual machining with machining types
3.3
Manual machining with machining types
3.3.1
Axis-parallel traversal
Functionality
The axis-parallel traversal is used for the simple cutting on the workpiece or for positioning
the axes.
If you move the axis direction switch, the control then moves the X and Z axes accordingly.
Operating sequences
1. You can access the "Parallel traversing of axes" function via the main screen "Manual
2. If a different machining mode is active, press the "Machining mode" softkey until "Parallel
32
Machine Plus".
traversing of axes" is displayed.
Figure 3-11
Main screen for "Manual Machine Plus"
Programming and Operating Manual, 12/2012, 6FC5398-3DP10-0BA0
Manual Machine Plus (Turning)