Siemens SINUMERIK 808D Programming And Operating Manual page 90

Machining the machining step program manually
Inserting a groove/cutting cycle into the program.
Change into the dialog box for the groove/cutting cycles (Page 48).
Inserting a thread cycle
Change into the dialog box for the thread cycles (Page 58).
Change into the dialog box for machining simulation (Page 95).
The selected step program is saved by pressing the "Execute" softkey.
This softkey opens the screen form in which the machining (Page 96) step program is
actually executed:
The softkey function changes from "Execute" to "Exec. here" by pressing the <ETC> key.
90
Programming and Operating Manual, 12/2012, 6FC5398-3DP10-0BA0
Manual Machine Plus (Turning)