Manual machining
3.4 Manual machining using cycles (functions)
3.4.7.1
Roughing cycle A
Functionality
The function "Roughing A" is used to produce a simple stepped contour (step), with the
option of working the transitions to adjacent faces as a radius or chamfer.
Operating sequences
You can access the turning cycle overview by pressing the softkey "Turning" in the basic
screen for "Manual Machine Plus".
In the softkey menu "Turning", press the softkey "Roughing cycle A".
Alternatively, you can select "Roughing cycle A" from the turning cycle overview with
<Cursor keys> and activate with the input key.
Figure 3-42
66
Roughing cycle A, position "Outside right"
Programming and Operating Manual, 12/2012, 6FC5398-3DP10-0BA0
Manual Machine Plus (Turning)