Siemens SINUMERIK 808D Programming And Operating Manual page 97

Operating sequences, executing the machining step program
The current machining status is displayed in the center of the execute. This status could be
one of the following:
● Machining not started
● Machining active
● Machining aborted
● Machining interrupted
● Machining finished
In the example, the text "Machining not started" is displayed.
1. Start machining using the <CYCLE START> key.
2. If machining was terminated (e.g. "machining completed"), then the execution screen can
Note
The individual machining steps are performed with the currently programmed direction of
spindle rotation! This need not coincide with the position of the spindle direction switch or
with the spindle direction selected with the spindle keys!
Manual Machine Plus (Turning)
Programming and Operating Manual, 12/2012, 6FC5398-3DP10-0BA0
The machining operation on the workpiece is executed.
The individual machining steps are executed in the order in which you program them.
Press the <CYCLE STOP> key if you want to interrupt the machining operation.
be exited using the "Cancel" softkey.
Machining the machining step program manually
4.4 Executing the machining step program
97