Multiple Extended Grooving - Siemens SINUMERIK 808D Programming And Operating Manual

3.4.5.4

Multiple extended grooving

Functionality
Note
The "Multiple extended grooving" function supplements the "Extended grooving" option. This
function can be used only if all the parameters for the "Extended grooving" function have
been assigned!
As soon as you position the cursor in any of the input fields in the multiple grooves area of
the screen, the display changes from single groove to multiple grooves:
Figure 3-33
Parameter
Parameter
Distance l3
Number n
Manual Machine Plus (Turning)
Programming and Operating Manual, 12/2012, 6FC5398-3DP10-0BA0
Multiple extended grooving
Description
Groove offset: This input value determines the offset between several identical grooves
during production.
Number of grooves to be produced. Entering "0" or "1" here has the same effect: A single
groove is produced. When you enter a value of ">1", the appropriate number of grooves is
machined. The input value in parameter "Length I3" defines the necessary offset.
3.4 Manual machining using cycles (functions)
Manual machining
57