Manual Machining; Fundamentals Of Manual Machining - Siemens SINUMERIK 808D Programming And Operating Manual

Manual machining

3.1

Fundamentals of manual machining

Functionality
You can perform the following machining operations manually:
● Axis-parallel traversal
● Taper turning
● Radius turning
● Drilling - centered
● Tapping
● Groove cycles/Expan. groove
● Thread cutting
● Rough turning of contours
Fundamentals
The following operations must be performed before manual machining can proceed:
● Axes referenced
● Tools measured
● Limit stops set
● Set workpiece zero point
Manual Machine Plus (Turning)
Programming and Operating Manual, 12/2012, 6FC5398-3DP10-0BA0
3
19