Manual Drilling Centered - Siemens SINUMERIK 808D Programming And Operating Manual

3.4.3

Manual drilling centered

Functionality
The "Manual drilling centered" function is designed to produce deep-hole drill holes in the
turning center. Before you start the cycle, you must position the tool in such a way that it can
approach the programmed Z initial position without risk of collision. The function itself will
position the tool on the center of rotation.
Operating sequences
You can access the drilling cycle overview by pressing the softkey "Drill." in the basic screen
for "Manual Machine Plus".
Figure 3-20
Manual Machine Plus (Turning)
Programming and Operating Manual, 12/2012, 6FC5398-3DP10-0BA0
Drilling cycle overview - "Drill. centric" selected
3.4 Manual machining using cycles (functions)
Manual machining
43