Roughing Cycle F - Siemens SINUMERIK 808D Programming And Operating Manual

3.4.7.6

Roughing cycle F

Functionality
The function "Roughing F" allows cycle-supported production of an end face (cutting
direction "Planar") or of a peripheral surface (cutting direction "Longitudinal").
Operating sequences
You can access the turning cycle overview by pressing the softkey "Turning" in the basic
screen for "Manual Machine Plus".
In the softkey menu "Turning", press the softkey "Roughing cycle F".
Alternatively, you can select "Roughing cycle F" from the turning cycle overview with <Cursor
keys> and activate with the input key.
Figure 3-57
Manual Machine Plus (Turning)
Programming and Operating Manual, 12/2012, 6FC5398-3DP10-0BA0
Roughing cycle F, position "Outside right"
3.4 Manual machining using cycles (functions)
Manual machining
81