Changing The Feedrate/Spindle Value - Siemens SINUMERIK 808D Programming And Operating Manual

Manual machining
3.2 Display and operator control options in the main screen
3.2.7

Changing the feedrate/spindle value

Changing the operating sequence, feed rate "F"/spindle value "S"
Follow the sequence of operations below to enter the required feedrate or spindle value:
1. Position the cursor on the input field for the value (see screenshot below) in the main
2. Edit the programmed value using the numeric keys.
3. Press the <INPUT> key.
The F value (feed rate) or the S value (spindle) can only be changed if all axes and the
spindle are stationary.
28
screen for "Manual Machine Plus".
Figure 3-7 Main screen "Manual Machine Plus", entry of feedrate value "F"
The value is activated.
CAUTION
Programming and Operating Manual, 12/2012, 6FC5398-3DP10-0BA0
Manual Machine Plus (Turning)