Siemens SINUMERIK 808D Programming And Operating Manual page 88

Machining the machining step program manually
Screen handling functions
"Cursor up / down" With the cursor up/cursor down keys, you can move selected machining steps up and down within
the list. The selected step is displayed on an orange background.
"Cursor right" If you have selected a machining cycle, the input screen for this cycle or the taught block opens
automatically when you press the cursor key on the right.
Softkeys
Other inputs in the screen are made with softkeys:
Opens the following dialog box:
Figure 4-3
Displays a dialog used to open an existing machining step program or create a new
machining step program.
If the file is not located in drive N (NC storage), ensure that the external medium is not
removed during the machining.
A save dialog appears.
Returns to the menu for the machining step program
88
"File..." menu
Programming and Operating Manual, 12/2012, 6FC5398-3DP10-0BA0
Manual Machine Plus (Turning)