Navigating The Service Software Menus; P10 & P30 Series Consoles - Precor TRM700-16 Base Service Manual

Steps
1. Make sure the P82 is set to the Welcome home page.
2. Press and hold the VOL down key while pressing CH up >CH down > CH down > CH
up:
3. Use the touch keypad to type in the service access code.

Navigating the Service Software Menus

The hardkeys and softkeys used to navigate the service software menus vary between con-
sole models. Go to section listed below for your particular console to learn how to navigate the
service software menus.
P10 & P30 Series Consoles
The service software menus are organized in a sequential top-menu to sub-menu archi-
tecture.
Menus and submenus are accessed using a combination of Up/Down arrow, OK, BACK, and
ENTER keys. By design, the arrow keys should be used to scroll from one menu item to the
next, while the OK, ENTER, and BACK keys are used to enter and exit submenus. In some
cases the operation is inconsistent, and the OK/ENTER key will instead advance to the next
menu rather than enter a submenu
CONSOLE KEY
Up/Down
Experience Series 700 Line Treadmills
FUNCTION/DESCRIPTION
Moves up and down through the current menu.
3 Standard Service Modes
Navigating the Service Software Menus
19