Precor TRM700-16 Base Service Manual page 32

CLUB PARAMETER
SAFETY CODE
SELECT LANGUAGE
SET UNITS
SET MAX WORKOUT
TIME
SET MAX PAUSE
TIME
SET COOL DOWN
TIME
SET METRICS
DEFAULT
SET SPEED LIMIT
SET INCLINE LIMIT
HIDDEN PROGRAMS Either enabled or disabled*, the setting allows the unit to access
REMOTE SPEED
CONTROL
AUTO STOP
CONFIGURE
MAINT CONFIG
Experience Series 700 Line Treadmills
Enabled or disabled. When enabled, a user password (xxxx) is
required o use the machine.
Factory default: disabled.
Sets the default language for all workouts on this machine. Lan-
guage for single use workouts can also be set by the user from the
workout options.
Default: English
Sets units of measure to US standard or Metric.
Range: U.S, Metric
Default: U.S.
Sets the maximum allowable user workout time per session.
Range: 1 to 240 min, NO LIMIT
Default: 60 min
Sets how long the equipment remains in a paused banner during a
workout before resetting.
Range: 1 to 120 sec
Default: 120 sec
Sets the amount of time that a cool down period will occur at the
end of every workout. Factory default is 5 minutes. Settable in 1
minute increments.
Range: 1 to 5 min
Default: 5 min
Sets a metric that may be of specific importance to the specific
facility or fitness trainer. The selected metric will scroll across the
screen at regular intervals during the workout.
Default: none
Sets the user maximum speed.
Default: 12 mph
Sets the user maximum speed.
Default: 15 %
specialized fitness tests designed for police, fire fighters and the
military.
Default: disabled
Not used.
Sets Auto Stop to On or Off.
Default: ON
(ASL only) Sets the ASL maintenance counter reminder function
ON/OFF (ASL pulsing blue light ON/OFF).
3 Standard Service Modes
Club Settings Service mode (5651565)
DESCRIPTION
25