Precor TRM700-16 Base Service Manual page 128

5. Reinstall the Drive Roller, see
6. Reinstall the Take-up Roller, see
7. Center and square the running belt onto the Take-up and Drive rollers, tension the belt
to specification and verify the belt tracking, see
Adjustment" on
8. Reinstall the hood cover, see
left/right Landing Trim covers, see
9. Connect the power cord and switch the ON/OFF circuit breaker ON.
10. Do the Operation Verification tests (see
to service.
Experience Series 700 Line Treadmills
"Drive Roller Replacement" on
"Take-up Roller Replacement" on
page 40.
"Covers and Panels Replacement" on
"Covers and Panels Replacement" on
Belt and Deck Replacement Procedure
"Running Belt Tension and Tracking
"Operation Verification" on
5 Replacement Procedures
page 107.
page 112.
page 54, and
page 54.
page 15) and return
121