Precor TRM700-16 Base Service Manual page 117

2. Reinstall the left and right Roller Keepers and secure using the #3 screw fasteners (one
fastener per Keeper).
3. Center and square the running belt onto the Take-up and Drive rollers and tension to
specification, see
verify tracking or apply power at this step in the process, the running belt tracking will be
verified after the Drive Belt is installed.
Experience Series 700 Line Treadmills
"Running Belt Tension and Tracking Adjustment" on
5 Replacement Procedures
Drive Roller Replacement
page 40. Do not
110