Hardware Validation Service Mode (51765761); P10 & P30 Series Consoles - Precor TRM700-16 Base Service Manual

CONSOLE KEY
Scroll Up/Dwn
BACK hardkey
PAUSE hardkey

Hardware Validation Service Mode (51765761)

Access Code: 5,1,7,6,5,7,6,1 (see
The hardware diagnostic tests are accessed thru the Hardware Validation service software
mode Hardware Validation mode provides a set of automated diagnostic tests and hardware
calibration routines used to troubleshoot, calibrate, and verify machine proper operation.. The
diagnostic tests are customized for the particular equipment type and console configuration.
P10 & P30 Series Consoles
Menu path: Hardware Validation Tests (5,1,7,6,5,7,6,1) > Hardware Validation Tests.
DIAGNOSTIC
TEST
DISPLAY TEST
Experience Series 700 Line Treadmills
FUNCTION/DESCRIPTION
STOP, etc.) or menu item to select.
Use your finger to select while swiping your finger Up/Dwn to scroll
through menu lists. Some menus provide an on-screen scroll bar to
scroll Up/Dwn.
• On P62 consoles, use the control keypad BACK
or return to the previous menu display.
• Continue selecting the BACK hardkey to exit the service software.
Stop a running diagnostic test.
"Service Access Codes" on
Tests the console LEDs. Successively press the OK key to verify each
Hardware Validation Service Mode (51765761)
page 17)
TEST DESCRIPTION
3 Standard Service Modes
hardkey to go back
21