M9.41Si Long Term Storage.29; Displaying The Odometer And Software Version.29; Obtaining Service.29 - Precor M9.41si Owner's Manual

Low impact treadmill featuring the heart rate interactive system
Hide thumbs Also See for M9.41si:
Table of Contents

Advertisement

1
M9.41si Long Term Storage
When the M9.41si is not in use, ensure that the power supply cord is unplugged from the wall
outlet and is positioned so that it will not become damaged or interfere with other equipment or
people.
There are no special storage requirements for the M9.41si other than ensuring that it is kept free
from dirt, moisture, or damage.
Displaying tho Odometor and Software Version
To display the total number of miles or kilometers that the treadmill has accumulated or the
software version number, take the following steps:
1.
In rapid succession, press STOP, SPEED T. and QUICK START. (Numbers appear on the
display as you press the respective key.)
Note; You need to press SPEED T within 1 second after pressing STOP or the Precor banner
returns and you need to start step 1 over again,
2.
The software version appears and scrolls across the display. This number is useful if you need
to call customer service.
3.
Press ENTER, to view the cumulative odometer (total miles or kilometers). A few seconds
after the odometer scrolls across the display, the Precor banner reappears.
Obtaining Service
Do not attempt to service the M9.41si Low Impact Treadmill yourself except for minor belt
adjustments and maintenance tasks as described in this manual. The M9.41 si treadmill does not
contain any user-serviceable parts, or parts that require lubrication.
For information about product operation or service, contact an authorized Precor dealer or a
Precor Factory Authorized Service Company. To locate the dealer or service person nearest you,
call 1-800-4-PREC0R.
To help the customer service representative expedite your call, have your serial number available.
The serial number is printed on a label located underneath the treadmill at the left, rear corner of
the running bed frame. If you haven't already written the serial number In the space provided below
during the assembly process, you will need to get on your knees and bend down to see it.
Model number:
M9.41si-
Serial number:----
If you have any questions regarding the treadmill, use the model and serial numbers whenever you
call your Precor dealer or service person.
page 29

Advertisement

Table of Contents
loading

Table of Contents