Precor TRM700-16 Base Service Manual page 121

2. Set the Take-up roller into the left and right mounting brackets.
3. Connect the power cord and switch the ON/OFF circuit breaker to ON.
4. Center and square the running belt between the Drive and Take-up rollers. Tension to
specification and verify tracking, see
on page 40.
5. Reinstall the left and right Landing Trim covers, see
on page 54 and hood cover, see
Experience Series 700 Line Treadmills
"Running Belt Tension and Tracking Adjustment"
"Covers and Panels Replacement"
"Covers and Panels Replacement" on
5 Replacement Procedures
Take-up Roller Replacement
page 54,.
114