Belt and Deck Replacement Procedure
About
This procedure provides instruction to remove and replace the Running Belt and Deck.
Procedure
Review entire procedure before starting.
Removal Instructions
1. Switch the power OFF and
2. Remove the hood cover, see
left/right Trim Landing covers, see
1
Disconnect a device power cord plug or cable connector from the power receptacle or outlet.
Experience Series 700 Line Treadmills
1
unplug
the power cord.
"Covers and Panels Replacement" on
"Covers and Panels Replacement" on
5 Replacement Procedures
Belt and Deck Replacement Procedure
page 54, and
page 54.
116