Precor TRM700-16 Base Service Manual page 131

TIP: Remove the MC fasteners so that the MC module can be raised to allow easy
access to disconnect and connect the
8. Remove the lift motor ground wire (GRN or GRN/YEL) from the frame chassis ground
screw fastener.
9. Remove the extension tube hitch pin and clevis pin fastener hardware from the lift plat-
form mounting bracket. Hold the lift platform while removing the clevis pin and carefully
rest on the floor.
1
Input and Output Interface.
Experience Series 700 Line Treadmills
1
I/O connectors.
5 Replacement Procedures
Lift Motor Replacement
124