Power Cord Replacement; About; Procedure - Precor TRM700-16 Base Service Manual

Power Cord Replacement

About

This procedure provides instruction to replace the power cord.
ID
Power Entry Assembly
Power Cord
ON/OFF SW Circuit Breaker

Procedure

Review entire procedure before starting.
Removal Instructions
1. Switch the power OFF and
TIP:For easier access, raise the incline to maximum before removing input power.
Access the service Hardware Validation (51765761) and use the
CROSSRAMP/INCLINE Test to raise the incline and then remove power.
1
Disconnect a device power cord plug or cable connector from the power receptacle or outlet.
Experience Series 700 Line Treadmills
Description
1
unplug the power cord.
5 Replacement Procedures
Power Cord Replacement
73