ID
Power Entry Assembly Bracket
Power Cord Inlet Assembly
ON/OFF SW Circuit Breaker
ASL PCA
ASL PCA Bracket
Removal Instructions
1. Switch the power OFF and
TIP:For easier access, raise the incline to maximum before removing power. Access
the service Hardware Validation (51765761) and use the CROSSRAMP/INCLINE
Test to raise the incline and then remove power.
2. Remove the hood cover, see
1
Disconnect a device power cord plug or cable connector from the power receptacle or outlet.
Experience Series 700 Line Treadmills
Description
1
unplug
the power cord.
"Hood Cover Replacement" on
5 Replacement Procedures
ON/OFF SW Circuit Breaker Replacement
page 56.
77