Installation And Connection - D-Link DWC-2000 Quick Installation Manual

4 x 100/1000base-t/sfp combo ports to 2 usb ports wireless controller
Hide thumbs Also See for DWC-2000:
Table of Contents

Advertisement

Available languages

Available languages

The following table lists the name, color, status, and description of each device LED.
LED
Indicator
Power/
Status
Fan
USB
Tx/Rx
Status of
RJ-45 Port
Link Speed of
RJ-45 Port
Link and
TX/RX of
SFP Port
Default Interface Settings
Ethernet Interface
LAN (1-4)

Installation and Connection

Before You Begin
Observe the following precautions to help prevent shutdowns, equipment failures, and injuries:
• Before installation, always check that the power supply is disconnected.
• Ensure that the room in which you are operating the device has adequate air circulation and that the room
temperature does not exceed 40 °C (104 °F).
• Ensure there is at least one meter (three feet) of clear space in front and back of the device.
• Do not place the device in an equipment rack frame that blocks the air vents on the sides of the chassis.
Ensure that enclosed racks have fans and louvred sides.
• Ensure that none of these hazardous conditions exist before installation: moist or wet floors, leaks,
ungrounded or frayed power cables, or missing safety grounds.
Colour
Status
Orange/
Solid Orange
Green
Solid Green
Blinking Orange
Light Off
Green/
Solid Green
Red
Solid Red
Green
Solid Green
Blinking Green
Light Off
Green
Solid Green
Blinking Green
Light Off
Green/
Solid Green
Orange
Solid Orange
Light Off
Green/
Solid Green
Orange
Blinking Green
Solid Orange
Blinking Orange
Interface Type
Static IP
Description
Power-on process in progress
Power-on process complete
Device has crashed and is in recovery mode
The device is powered off
The fan is operating normally
The fan has failed
The link is good
There is activity on this port
No link
Link is present
Port is sending or receiving data
No link
Port is operating at 100 Mbps
Port is operating at 1000 Mbps
Port is operating at 10 Mbps
Port is operating at 100 Mbps
Port is sending or receiving data at 100 Mbps
Port is operating at 1000 Mbps
Port is sending or receiving data at 1000 Mbps
IP Address
192.168.10.1/24
Web-Based
Management
Enabled

Advertisement

Table of Contents
loading

Table of Contents