Application Port Forwarding; Figure 98: List Of Configured Resources, Which Are Available To Assign To Ssl Vpn Policies - D-Link DWC-1000 User Manual

Wireless Controller
Figure 98: List of conf igured resources, which are available to assign to
SSL VPN policies

7.3 Application Port Forwarding

Setup > VPN Settings > SSL VPN Server > Port Forwarding
Port forwarding allows remote SSL users to access specified network applications or
services after they login to the User Portal and launch the Port Forwarding service.
Traffic from the remote user to the controller is detected and re-routed based on
configured port forwarding rules.
Internal host servers or TCP applications must be specified as being made accessible
to remote users. Allowing access to a LAN server requires entering the local server IP
address and TCP port number of the application to be tunnelled . The table below lists
some common applications and corresponding TCP port numbers:
TCP Application
FTP Data (usually not needed)
FTP Control Protocol
SSH
Telnet
SMTP (send mail)
HTTP (web)
POP3 (receive mail)
NTP (network time protocol)
Citrix
Terminal Services
Port Number
20
21
22
23
25
80
110
123
1494
3389
144
User Manual