Basic Configuration Step #3. Change The Ssid Name And Set Up Security - D-Link DWC-1000 User Manual

Field
Channel

Basic Configuration Step #3. Change the SSID Name and Set Up Security

You can configure up to 64 separate networks on the wireless controller and apply them
across multiple radio and virtual access point interfaces. By default, 16 networks are pre-
configured and applied in order to the access points on each radio. In this procedure, you
will edit one of the preconfigured networks and change its SSID and security settings to suit
your requirements.
1. Click ADVANCED > SSIDs. The following NETWORKS page appears, with a list of the
wireless networks configured on the wireless controller.
2. Under the SSID column, click an SSID. The following NETWORKS page appears.
Basic Configuration
Operating channel for the radio.
35
DWC-1000 Wireless Controller User's Guide
Description